CARE INSTRUCTIONS

We would never want to see your SMG pieces get damaged or lose their quality. To keep your items looking fresh and lasting longer, please take a moment to carefully read and follow the care instructions below.

 

HI VIS TEES / SINGLETS 

 WASHING:

  • Cold wash on a gentle setting, separately from regular clothing to prevent colour transfer.
  • Avoid using harsh chemicals like bleach and fabric softener to prevent damage to fabric and reflective tape.
  • For stubborn stains, gently wipe with a clean, dry cloth and a mild stain remover.
  • Turn clothing inside out before washing to protect the reflective tape.

 DRYING:

  • Line dry or use the “no heat” setting on your dryer if needed to prevent shrinkage and/or damage to the fabric and reflective tape.
  • Avoid direct sunlight, as UV rays can fade the fluorescent colours.

BEANIES

 HAND WASHING:

Handwashing is the best way to clean your beanie without damaging the embroidered logo.

  • Fill a bowl or sink with cold or lukewarm water (NOT HOT).
  • Add a mild detergent, one made for delicate items is best.
  • gently dip your beanie in the water and move it around with your hands.
  • Avoid scrubbing the logo or embroidery.
  • Rinse with cool water until the soap is all gone.
  • Press gently to remove excess water, DON'T ring or twist.
  • Lay flat on a clean towel to dry, reshaping while still damp.

 WASHING MACHINE (IF NEEDED):

  • Place beanies inside a mesh laundry bag or pillowcase to protect the embroidery.
  • Avoid using harsh chemicals that can damage the beanie, use a mild detergent.
  • Use a delicate or gentle cycle with cold water.
  • Wash with similar, dark coloured items.
  • Set the spin cycle to low or skip all together.

 DRYING:

  • Never use a tumble dryer, as high heat can shrink the beanie and damage the neon thread.
  • DO NOT ring or twist the beanie to remove water, as this destroys its shape.
  • Gently press out excess water, then lay it flat on a clean towel to air dry. Reshape the beanie while still damp. 

KEYCHAINS

 CLEANING PROCESS:

  • Remove the keychain from your keys.
  • Mix a few drops of mild dish soap into a bowl of lukewarm water.
  • Dip a soft-bristled toothbrush or cotton swab into the soapy water and gently scrub the metal and coloured logo areas to remove buildup. 
  • Rinse the keychain thoroughly under lukewarm running water to remove all soap residue.
  • Pat the keychain dry immediately with a soft, lint-free microfibre cloth to prevent water spots.